Are your kitchen units in position and level?
Please be aware that in the event your cabinets are not level this may cause your Granite or Quartz to crack on installation. We cannot be responsible for any damages when the kitchen cabinets are not installed correctly.

Yes No

If you have end panels are these in place?
Please be aware that your end panels would need to be in situ for the template.

Yes No

Are the kitchen units screwed to the wall?
As above, if the kitchen units are not attached to the walls this will not allow us to template accurately.

Yes No

Are the hob and sink on-site?
We ask to see any accessories, such as Sinks, Taps or Pop-up sockets, anything that will need to be incorporated into the worktop production. Please advise our template technician on what you have.

Yes No

Please ensure any existing worktops are clear *
What we are looking for is a tidy work surface with no appliances such as Microwaves or Kettles in place. We need to be able to shoot the laser over the surface of the worktop area in plain sight to the target.

Please tick the box

Information for refurbs only, not applicable to brand new kitchens
Please note existing worktops, sinks and cabinets may be damaged during installation of your new worktops. Please discuss any concerns with our template technician who will advise the best course of action.

Please tick the box

Is there ample access into the property?

Yes No

Is there suitable parking?

Yes No

What level of the property is the installation?

Ground floor First floor Second floor or above

If you have anything you feel we should know please write it here

What level of the property is the installation?

Ground floor First floor Second floor or above

Will the decision maker be available to meet the template technician?
This is important as we will be confirming a number of items on your order and discussing options available to you relevant to your install. We will be confirming your chosen worktop colour, drainer grooves, upstands, cut-outs for sink/hob/tap/sockets and anything else that could affect the order. We require this to be confirmed at this stage as we will be putting the job into production in a very short space of time.

Yes No

Name of person on-site if different from above

Please be advised that by clicking submit below you are agreeing to us booking in a template with you. Existing worktops, sinks and cabinets may be damaged during installation so please discuss any concerns with our template technician. If we arrive on-site and we are unable to carry out the template there may be a charge applied of £250.

Please tick the box

In order to arrange your laser template we require all our customers to complete this simple checklist to ensure when we arrive, your template goes smoothly and it will eliminate any delays.

Stevenage showroom & factory

Cambridge showroom & factory